|
|
Surface and mechanical properties of a-CSi:H and a-CSiO:H films
Plichta, Tomáš ; Shukurov, Andrey (referee) ; Klapetek, Petr (referee) ; Čech, Vladimír (advisor)
The dissertation thesis deals with the preparation and characterisation of a-CSi:H and a CSiO:H thin films prepared using the process of plasma enhanced chemical vapour deposition (PECVD). Tetravinylsilane (TVS) and its mixtures with argon and oxygen were used to deposit films on both planar substrates and fibre bundles. Main characterisation techniques were employed to study the topography of films, namely atomic force microscopy (AFM). Their mechanical properties were studied through nanoindentation; the nanoscratch test was used to assess the film adhesion to the substrate. Other analysed properties were internal stress and friction coefficient. The particular attention was paid to the work of adhesion and its determination. This knowledge was further applied to the preparation of surface treatments of glass fibres and, subsequently, polymer composites. Those were tested using the push-out test and the short beam shear test. Based on the results, the effects of deposition conditions and the relationships between the studied properties and quantities were determined.
|
|
|
Surface modification of glass fibers for polymer composites
Knob, Antonín ; Marek,, Aleš (referee) ; Burša, Jiří (referee) ; Čech, Vladimír (advisor)
The doctoral thesis is aimed at preparation of glass fiber reinforced polymer composites with controlled interphase formed by plasma-polymerized tetravinylsilane and tetravinylsilane/oxygen thin films. The thin polymer films of specific physico-chemical properties and thickness were deposited to improve interfacial adhesion of glass fiber/polyester composites. The fiber surface modification was performed by using plasma enhanced chemical vapor deposition in low-temperature RF plasma operating in an various effective power range and different treatment time. Test results were examined in relation to the interlayer thickness and different treatment conditions. The prepared interlayers were analyzed to evaluate physico-chemical composition and properties (XPS, RBS, ERDA, FTIR and spectroscopic elipsometry). Selected mechanical properties were evaluated by AFM. Mechanical response of plasma interlayers was evaluated by short beam shear test and direct method of testing the interfacial shear strength using microindentation. The interphase shear failure was controlled by the shear strength at the interlayer/fiber interface as follows from experimental and model data.
|
|
|
Surface and mechanical properties of a-CSi:H and a-CSiO:H films
Plichta, Tomáš ; Shukurov, Andrey (referee) ; Klapetek, Petr (referee) ; Čech, Vladimír (advisor)
The dissertation thesis deals with the preparation and characterisation of a-CSi:H and a CSiO:H thin films prepared using the process of plasma enhanced chemical vapour deposition (PECVD). Tetravinylsilane (TVS) and its mixtures with argon and oxygen were used to deposit films on both planar substrates and fibre bundles. Main characterisation techniques were employed to study the topography of films, namely atomic force microscopy (AFM). Their mechanical properties were studied through nanoindentation; the nanoscratch test was used to assess the film adhesion to the substrate. Other analysed properties were internal stress and friction coefficient. The particular attention was paid to the work of adhesion and its determination. This knowledge was further applied to the preparation of surface treatments of glass fibres and, subsequently, polymer composites. Those were tested using the push-out test and the short beam shear test. Based on the results, the effects of deposition conditions and the relationships between the studied properties and quantities were determined.
|
|
|
Surface modification of glass fibers for polymer composites
Knob, Antonín ; Marek,, Aleš (referee) ; Burša, Jiří (referee) ; Čech, Vladimír (advisor)
The doctoral thesis is aimed at preparation of glass fiber reinforced polymer composites with controlled interphase formed by plasma-polymerized tetravinylsilane and tetravinylsilane/oxygen thin films. The thin polymer films of specific physico-chemical properties and thickness were deposited to improve interfacial adhesion of glass fiber/polyester composites. The fiber surface modification was performed by using plasma enhanced chemical vapor deposition in low-temperature RF plasma operating in an various effective power range and different treatment time. Test results were examined in relation to the interlayer thickness and different treatment conditions. The prepared interlayers were analyzed to evaluate physico-chemical composition and properties (XPS, RBS, ERDA, FTIR and spectroscopic elipsometry). Selected mechanical properties were evaluated by AFM. Mechanical response of plasma interlayers was evaluated by short beam shear test and direct method of testing the interfacial shear strength using microindentation. The interphase shear failure was controlled by the shear strength at the interlayer/fiber interface as follows from experimental and model data.
|
guest ::
